Home > Hard Drive > When I Add 2nd Sata Drive-will Not Boot

When I Add 2nd Sata Drive-will Not Boot

Contents

BIos only has AHCI and RAID for SATA options0HDD not booting over SATA, only over USB0Changed SATA port, BIOS detects the drive and has it in correct boot order but still Consider replacing it with something more powerful.If you remove the new drive and it still won’t boot—even to Setup—I’d suspect that you damaged something else while installing the drive. But turn the cards around. All rights reserved. http://simplecoverage.org/hard-drive/wd-caviar-se-sata-hdd-wont-boot-to-xp.php

I changed it from legacy and UEFI to just UEFI and even though my SSD was not showing it still booted from it! So not only did the Windows Boot Loader choose to boot the flash drive as "windows 7", it had done some kind of hardware initialization of the graphics system so that This was an IDE only system, don't know if it would apply to SATA? And when I got Windows back up, the entry was back where it started. http://www.pcworld.com/article/2360427/what-to-do-when-a-second-hard-drive-bricks-your-pc.html

Installed New Hard Drive Windows Won't Boot

Thank you thank you thank you. TipsNNTricks 1,218,272 views 7:08 How to repair the MBR (Master Boot Record) - Duration: 3:58. Installation & Setup Installed new hard drive - Windows 7 won't boot from CDI just installed a new WD 500 GB hard drive into my DELL computer. Password Advanced Search Show Threads Show Posts Advanced Search Go to Page...

Both drives should be listed on the opening screen. Check to make sure that no cables are loose. it shows in the bios option, but goes no where when try to boot or install windows weird problem, windows wont boot when restarted ,even with the new hard drive or Installed A New Hard Drive Now Computer Won't Turn On Good luck!

Unplug both cables to the new drive and boot. Computer Won't Power On With Hard Drive Plugged In Generally, soon after you turn on the PC, well before Windows loads, a message similar to “Press F2 for Setup” flashes onscreen. On the other one I installed Windows 10. i5 4690k MSI z97 PC Mate MOBO Kingston 240gb SSD Windows 8.1.

But within a half hour it was able to start. Windows Won't Boot Without Second Hard Drive If this fails to solve the problem, boot into Elevated Command Prompt to run Diskpart Clean Command on the 1tb to clear the boot sector which must be interfering somehow. Have a read of Multibooters, Vista Dual and Multibooting - A Guide to the Multiboot Process for a very readable tutorial on how it all works. DIY Perks 3,991,145 views 10:28 Windows Error Recovery FIX - Windows Failed To Start - Duration: 4:18.

Computer Won't Power On With Hard Drive Plugged In

SATA1 and SATA3 are free. Tech Support Guy is completely free -- paid for by advertisers and donations. Installed New Hard Drive Windows Won't Boot So removed them and have now reinstalled 8.1 on my SSD. Replaced Hard Drive Wont Boot It takes less than a minute and is completely free!

Hope this helps! get redirected here I am either stuck with it BSOD on Windows 7 or not letting me boot from SSD as the drive is locked. if I press f1 instead of f2, the pc boots properly and the drive is shown in my computer / disc manager etc. Rating is available when the video has been rented. Windows 10 Won't Boot With Second Hard Drive

rayi23, Dec 1, 2008 #4 Jack Horner Joined: Jan 16, 2004 Messages: 914 Can you remove the 750 from your boot order. How Ubuntu can help a computer in distress Windows maintenance, done dirt-cheap Troubleshoot Your Boot-Up and Shutdown Problems Video Nvidia's mighty GeForce GTX 1080 Ti cranks PC gaming to 11