This logical name will be used to identify the printer and will be associated to the card address. To configure a Hewlett-Packard print device that is directly connected to the network 1.Click Start, For a simple PC-to-PC network, nothing else is required.We have now defined all the 4 basic components of a network:- the "Client" ( called: Workstation, this is a Client for Microsoft Microsoft does not provide support for the network client at this time. You will see the Network Setup Wizard window. navigate here
Then click the Properties button below the window. If you're new to Tech Support Guy, we highly recommend that you visit our Guide for New Members. Figure 3.26: Windows NT Network NeighborhoodDouble-clicking the server name will show the resources that the server is offering to the network, as shown in Figure 3.27. Stay logged in Sign up now! https://forums.techguy.org/threads/want-to-install-ethernet-in-nt-system.274221/
Be sure one end of your Ethernet cable is plugged into the adapter in the computer and the other end is plugged into the active Ethernet wall outlet. Style Default Style Contact Us Help Home Top RSS Terms and Rules Copyright © TechGuy, Inc. There is another option now, Phatware has a program called HPC NetProfile that allows you to change the whole TCP/IP configuration by selecting a profile!
You can safely ignore the other options. 22.214.171.124 WINS Address tabIf you are not using a DNS server, you still need a way of translating NetBIOS names to addresses and back If you don't have an IP address to use, and you are on a network by yourself, steal ours, as the 192.168. The Workstation service is mandatory. Install networking.
Latest Podcast Subscribe to Podcast Recommended Follow Us You are reading NT4 Installation/Setup of Network-Drivers Share No Comment TECHGENIX TechGenix reaches millions of IT Professionals every month, and has set the RFC 1918 defines private IP addresses that you can use without conflicting with previously assigned addresses. If you attempt to connect to a new host, the Handheld PC will ask you to delete an existing ActiveSync connection. Configure the DNS and WINS name services.
The username and password are the ones assigned by your NT Server administrator and the domain must be the same as the Windows 95/NT System. A dialog box appears that allows you to type the name of your server and its share directory in Windows format. For more information, see the warning under the "Accessing the Samba Server" section, earlier in this chapter. This document is not applicable to systems running Windows 95 or Windows 98 and does not discuss how to configure TCP/IP.
Detailed configuration and installation information is provided in the Microsoft SNA Server Installation Guide and the Microsoft SNA Server Administration Guide. Top of pageChanging the Locally Administered Address There might be times this contact form If it is not then you must install it and make sure that there are no conflicts with your network - please contact your network administrator for assistance. With the LAN Interface Connection (LIC), an AS/400 computer can communicate with an Ethernet network. Any name servers listed in /etc/resolv.conf should work, but you'll get better performance by using a server nearby.  The address 127.0.0.1 is known as the localhost address, and always refers
This information assumes a moderate level of experience with networks and their configuration. If you're not by yourself, see your system administrator for some available addresses on your network. A dialog box for logging on to the Windows 95/NT Workstation/NT server will appear along with the appropriate Computer name (the desktop Windows 95/NT Computer Name as indicated in the Control If you encounter any difficulties and are a student, contact the Residential Computing Consultants (831-8825).
In this case, the test and the default printer are offered to the Window NT workstation. Figure 3.23: The DNS panel The Domain Name System (DNS) is responsible for translating human-readable computer names such as atrish.example.com into IP addresses such as 192.168.236.10. Finally, select the "Enable DNS for Windows Resolution" checkbox, so WINS will try DNS as a fallback if it can't find a name. http://simplecoverage.org/want-to/want-to-replace-master-boot-record-on-dual-boot-system-delete-linux-drive.php The features of Ethernet with Windows CE are ActiveSync, Backups (4 MB system takes less than 5 minutes!), copying software, software installation and other Internet Services such as Web browsing and
Prior versions do not support debugging over Ethernet. No, create an account now. I recommend using another Workgroup/Domain Name instead of the default name of Workgroup in order to avoid allowing users to access your data when you are dialed up to the internet.
From the Control Panel, double click on the Network icon. Developer Note: Remote debugging is supported with the Embedded Toolkit (ETK) v2.1 or later. Please start a New Thread if you're having a similar issue.View our Welcome Guide to learn how to use this site. All rights reserved. | Chris De Herrera's Windows CE Website About Getting Started By Device Enterprise Applications Reviews & Commentary FAQs By Version Press Releases Security Comparing to Palm Peripherals Bug
This is a great benefit to Network Administrators that have multiple offices or configurations. The interface is described in the IEEE 802.2 standard. This is a great benefit to Network Administrators that have multiple offices or configurations. Registry entries for DLC are found in the following location: HKEY_LOCAL_MACHINE \SYSTEM \CurrentControlSet \Services \DLC \Parameters \
There is the option to let the system search for a network board, but I myself prefer to "select from list" (which is also a lot quicker)Which protocol to use ?